Free inspection, estimate and thermal imaging. Call your local office or request online.

Blown-in vs. batt insulation: which is better?

Last updated:

The short answer

Neither is better everywhere. Blown-in loose fill conforms to any space and covers wiring, pipes and irregular attics well, which makes it the usual choice for topping up an existing attic. Batts are pre-cut blankets that fit neatly in open, evenly spaced framing such as new walls and floors. Installation quality matters more than the type: gaps and compression cut performance for both.

Blown-in (loose-fill)

DOE says loose-fill insulation can conform to any space without disturbing structures or finishes. It is made from fiberglass, cellulose or mineral wool and installed with a blowing machine.

Batts

DOE describes blanket insulation, in rolls or pre-cut batts, as perhaps the most common type in U.S. homes. Batts fit between standard stud and joist spacing.

Which for your attic?

For most existing attics with obstacles and old insulation, blown-in is faster and fills gaps. For a new, open attic floor, either works.

Which for walls?

Open walls take batts or spray foam. Closed walls in older homes can be dense-packed with blown cellulose or fiberglass through small holes.

Common questions

Can I mix them?

Yes. Blown-in over existing batts is a common attic upgrade, as long as the old batts are dry and clean.

Which costs less?

It depends on the area and material. DOE's consumer guide gives ranges for both; we quote your actual job for free.

Does blown-in settle?

Some loose-fill materials settle, so they are installed slightly deeper to account for it.

Sources

Related services

Get your free inspection and estimate. Thermal imaging is included. Call the office nearest you or request a time online.

Request a free estimate
AtlantaWarner RobinsNashvilleDestin