Free inspection, estimate and thermal imaging. Call your local office or request online.

How much attic insulation do I need in Georgia, Tennessee and Florida?

Last updated:

The short answer

It depends on your climate zone. ENERGY STAR's retrofit table recommends R-49 for an uninsulated attic in zones 2 and 3, which covers the Florida Panhandle and most of Georgia, and R-60 in zone 4A. If you already have 3 to 4 inches, the targets are R-38 for zones 2 and 3 and R-49 for zone 4A. Middle Tennessee counties fall in zone 3 or 4 depending on the county.

Find your climate zone

Climate zones come from the International Energy Conservation Code (IECC) and are set by county. Cobb, Fulton, DeKalb, Cherokee and Bibb counties in Georgia are zone 3A, and Okaloosa and Walton counties in Florida are 2A. Tennessee counties around Nashville sit in zone 3A or 4A depending on the county and code edition, so we confirm yours during the inspection.

Check what you have

Measure the depth of insulation on your attic floor in several places, away from the hatch. Most older attics we see are well below today's targets. If the insulation is wet, moldy or soiled by animals, it should be removed rather than covered.

Air seal first

ENERGY STAR's attic guidance pairs adding insulation with sealing air leaks first, around plumbing stacks, wiring holes, recessed lights and the attic hatch. Insulation slows heat; it does not stop air.

Do not block the vents

ENERGY STAR warns never to cover soffit vents with insulation. Baffles keep airflow open at the eaves.

Please note: Climate zone assignments can change between code editions. Confirm your county's zone with your local building department.

Common questions

What is R-value?

ENERGY STAR describes R-value as a measure of insulation's ability to resist heat traveling through it. Higher is better.

Is more always better?

Up to a point. Past the recommended level, extra insulation adds less benefit for the cost.

Should I use blown-in or batts?

See our guide comparing blown-in and batt insulation.

Sources

Related services

Get your free inspection and estimate. Thermal imaging is included. Call the office nearest you or request a time online.

Request a free estimate
AtlantaWarner RobinsNashvilleDestin